"The TightMetal pedal is simply my tone in a box. If you want tight, crushing, high-gain tone, the TightMetal pedal is the holy grail." --Mark Kloeppel- Misery Index
- True Bypass switch
- Tight Attack Control
- Gain, Tone, & Volume Controls
- Gate switch with Chomp™ setting for quick stops
- Mid switch with Thrash setting
- Effects Loop with Pre/Post switch..tracks On/Off Footswitch
- LED lit knobs when using a power supply
- Battery disconnect switch with red indicator
- Current: 14mA with 9V battery, 20mA with 9V adapter
- Works with 9V-18V supplies–like 'variacing' your amp up and down
- DC Adapter jack, standard 2.1mm X 5.5mm, center ground(-)
- BATTERIES/SUPPLY NOT INCLUDED
- Magnetic Battery access door opens w/o tools
- Handmade in the USA
- 5 Year Limited Warranty
Product Styling by Bob Hopkins. Mechanical Engineering support by Ken Chappell. Electrical & Mechanical Design and Tweaking by James Brown.
......Conceptual Ideas by You.
EDITOR'S PICK–NAMM 2011
PREMIER GUITAR REVIEW WITH VIDEO
The new TightMetal™ distortion pedal takes the TightDrive™ and TightBoost™ overdrive platform to the next level by providing over-the-top metal and hardcore crunch tones with adjustable tightness thanks to the Tight control. This issue came up early on when discussing various ideas with Mark Kloeppel, guitarist from the deathgrind band Misery Index. Like many other metal players, Mark was looking for a particular guitar tone, one with a lot of harmonics but with the ability to stop the notes really fast to work with their music. As on the original TightDrive, the Tight control varies the low end from smooth and thick to tight and aggressive so you get the attack that works with your guitar and picking style.
In the same way high gain tube amps are designed by cascading extra tube stages, the TightMetal was created by adding additional stages in front of a carefully modified TightDrive. The resulting thicker and much heavier distortion is tweaked by a simple built-in output EQ curve, and can further be adjusted by the output Tone control, so it’s easy to get a stack sound even through a small combo amp’s clean channel.
|After discussing some other consumer suggested ideas with Mark, a couple of switches were added to help customize the tone and help the playability. A Mid switch helps get a more traditional metal rhythm sound with its Thrash setting which gives a deeper scooped mid tone. To help stop the notes even quicker, a Noise Gate switch with an ultra quiet, quick decaying Chomp setting really helps a lot....especially when doing very quick riffs with a lot of palm-muted stops, so the whole band sounds even tighter. || |
At January NAMM '11, various metal players made suggestions about adjustments to the gate, and the result was a redesign to include an automatic gate threshold that tracks the gain control......this keeps the Chomp setting appropriately hard, and backs off on that setting as the gain is reduced.
All other features from the TightDrive remain intact, including the Effects Loop with its Pre/Post switch, the LED illumination of the controls, and the Battery On/Off switch and magnetic battery access door. The effects loop send can be used as a clean guitar send for re-amping in the studio if switched to Pre.
|Mark Kloeppel of Misery Index|
Here's another video with some more TightMetal Tone:
Here's a 7-string demo from NAMM w/Jason Frankhouser of Humans & Course of Ruin:
Here's a video demo Mark did for the TightMetal Distortion:
Greg Weeks with The Red Chord dropped by the Amptweaker booth at NAMM, and volunteered to try out the TightMetal with Bass.....check it out:
Here's a demo/review from The Tone King: